MS240USB喇叭麥克風操作說明
MS240USB喇叭麥克風操作說明
連接PC端到USB說明:
使用標配的Type-C USB 資料線，小端連接到主機，另外一端連接到PC端，主機主動開機，綠色LED燈長亮。
*延長線， 如果需要長距離佈線，可以使用選配的5米或10米帶晶片的USB延長線，配合標配的1.8米Type-C線使用。
Connected PC to USB
Used standard Type-C USB data line, form little-end is connected to the host, the other end is connected to the PU , host turn on active , green LED bright light long time.
Extension cord, if long distance wiring is required, can used 10m USB extension cord, with standard 1.8m Type-C cable.
Function Description (USB style)
功能說明（USB型號）:
一、開關機Turn On/Off
1、開機：長按3秒，打開電源，白色LED從左往右點亮燈條，語音提示開機。USB連接成功，綠色LED長亮。
Turn on: long press 3 seconds , turn the power , the white LED was bright from left to right. Video prompt on. When the USB was connected, green LED light bright long time
Turn Off: take 3 seconds , closed the power, the white LED will bright from right to left,video prompt off.
二、打開/關閉揚聲器：短按“ ”，打開/關閉揚聲器。
Turn on /off loudspeaker: short press , turn on/ off loudspeaker
Turn on loudspeaker : green LED light long bright
Turn off loudspeaker: purple LED light bright long time
* 使用AUX功能時候，建議關閉本地揚聲器
*Suggest close the local loudspeaker when you use AUX function
三、打開/關閉麥克風：短按“”，打開/關閉麥克風，
Turn on/off Microphone, short press “microphone”, turn on/ off microphone.
Turn on microphone, blue LED light bright long time.
Turn off Microphone, red LED light bright long time.
四、音量加減：操作“ +”、“- ”，即可控制主機的音量大小。
The volume addition and reduction: operation“+”. “-”button ,so you can control the volume of the host.
五、AUX模式：把有源音箱的3.5mm音訊線插頭插入主機的AUX口，長按3秒“麥克風 ”，關閉本地揚聲器，然後打開有源音箱電源。
AXU( full name Auxiliary) mode: make active speaker’s 3.5mm audio cable plug of the host’s AUX, long press microphone, turn off the local loudspeaker, then open active speaker power supply.
新增檔案:
MS240中英文操作說明(USB型號).pdf
連接PC端到USB說明:
使用標配的Type-C USB 資料線，小端連接到主機，另外一端連接到PC端，主機主動開機，綠色LED燈長亮。
*延長線， 如果需要長距離佈線，可以使用選配的5米或10米帶晶片的USB延長線，配合標配的1.8米Type-C線使用。
Connected PC to USB
Used standard Type-C USB data line, form little-end is connected to the host, the other end is connected to the PU , host turn on active , green LED bright light long time.
Extension cord, if long distance wiring is required, can used 10m USB extension cord, with standard 1.8m Type-C cable.
Function Description (USB style)
功能說明（USB型號）:
一、開關機Turn On/Off
1、開機：長按3秒，打開電源，白色LED從左往右點亮燈條，語音提示開機。USB連接成功，綠色LED長亮。
Turn on: long press 3 seconds , turn the power , the white LED was bright from left to right. Video prompt on. When the USB was connected, green LED light bright long time
Turn Off: take 3 seconds , closed the power, the white LED will bright from right to left,video prompt off.
二、打開/關閉揚聲器：短按“ ”，打開/關閉揚聲器。
Turn on /off loudspeaker: short press , turn on/ off loudspeaker
Turn on loudspeaker : green LED light long bright
Turn off loudspeaker: purple LED light bright long time
* 使用AUX功能時候，建議關閉本地揚聲器
*Suggest close the local loudspeaker when you use AUX function
三、打開/關閉麥克風：短按“”，打開/關閉麥克風，
Turn on/off Microphone, short press “microphone”, turn on/ off microphone.
Turn on microphone, blue LED light bright long time.
Turn off Microphone, red LED light bright long time.
四、音量加減：操作“ +”、“- ”，即可控制主機的音量大小。
The volume addition and reduction: operation“+”. “-”button ,so you can control the volume of the host.
五、AUX模式：把有源音箱的3.5mm音訊線插頭插入主機的AUX口，長按3秒“麥克風 ”，關閉本地揚聲器，然後打開有源音箱電源。
AXU( full name Auxiliary) mode: make active speaker’s 3.5mm audio cable plug of the host’s AUX, long press microphone, turn off the local loudspeaker, then open active speaker power supply.
新增檔案:
MS240中英文操作說明(USB型號).pdf
